:: Send Measurements > Bulkhead Installation Form

Bulkhead or Flat Sided Pedestal Installation Measurements Form

This form is for submitting the measurements taken using the Mounting Worksheet for Bulkhead or Flat Sided Pedestal Installation

Customer Information Name Phone Number Email Address Vessel Name Model Length Displacement

Wheel Configuration Drawing showing bulkhead measurements

1 Type of steering system (cable, hydraulic, geared) 2 Number of wheel turns, lock-to-lock 3 Wheel Diameter 4 Number of wheel spokes 5 Spoke diameter

Wheel Features Tapered spokes Dished wheel/Angled spokes Wood rim or large rim (over 1 inch diameter) Rim diameter: Wood wheel Ring inner diameter: Ring outer diameter:

Clearances Drawing showing bulkhead measurements

7 Distance from bottom of wheel to deck 8 Distance between spokes and bulkhead surface.

Take measurement where bracket will mount.
Minimum of 2.25". (Or 1.5" if drive pulley overhangs bulkhead edge)

9 Distance between spokes and nearest obstruction.

Minimum of 1.375" (35mm) for most installations.

10 Distance from wheel centerline to bulkhead edge

Wood wheel measurements Distance between spoke flat and bulkhead Distance between wooden inner ring and bulkhead 12 Belt Size
Use template to position motor box and measure for belt. If unsure, we can help determine the belt size based on your measurements.

Preferred motor box mounting option Bulkhead Mounting Options

Horizontal Horizontal, Drive Pulley overhangs bulkhead edge Vertical, next to wheel Vertical, below wheel

Control Box Mounting Method Drawing showing control box mounting options

Guardrail / Pipe Mount Rail Diameter (thickness): Bulkhead/Sidewall Mount Shelf or Console Overhead or Pilothouse Ceiling Other

Notes We can customize your autopilot if there is an unusual mounting situation—just let us know!