:: Send Measurements > L-Bracket Installation Form

L-Bracket Installation Measurements Form

This form is for submitting the measurements taken using the Mounting Worksheet for L-Bracket Installation

Customer Information Name Phone Number Email Address Vessel Name Model Length Displacement

Wheel Configuration Drawing showing L-bracket measurements

1 Type of steering system (cable, hydraulic, geared) 2 Number of wheel turns, lock-to-lock 3 Wheel Diameter 4 Number of wheel spokes 5 Spoke diameter

Wheel Features Tapered spokes Dished wheel/Angled spokes Wood rim or large rim (over 1 inch diameter) Rim diameter: Wood wheel Ring inner diameter: Ring outer diameter:

Clearances Drawing showing L-bracket measurements

7 Distance from bottom of wheel to deck 8 Distance between spokes and bulkhead surface.

Take measurement at 5" (127mm) out from the center of the wheel.
Minimum of 2.25". (Or 1.5" if drive pulley overhangs bulkhead edge)

9 Distance between spokes and nearest obstruction.

Minimum of 1.375" (35mm) for most installations.

10 Distance from wheel centerline to edge of bulkhead or sidewall.

(for L-bracket to bulkhead/pedestal or sidewall mount)

Wood wheel measurements Distance between spoke flat and bulkhead Distance between wooden inner ring and bulkhead L-Bracket Mounting Options

12 Belt Size
Use template to position motor box and measure for belt. If unsure, we can help determine the belt size based on your measurements.

Preferred motor box mounting option L-Bracket to Deck L-Bracket to sidewall, next to wheel L-Bracket to sidewall, below wheel L-Bracket to pedestal side, next to wheel L-Bracket to pedestal side, below wheel L-Bracket to pedestal side, drive pulley inside wheel radius

Motor box orientation Horizontal Vertical

Direction the drive pulley faces Forward (Standard) Aft (Reverse)

Control Box Mounting Method Drawing showing control box mounting options

Guardrail / Pipe Mount Rail Diameter (thickness): Bulkhead/Sidewall Mount Shelf or Console Overhead or Pilothouse Ceiling Other

Notes We can customize your autopilot if there is an unusual mounting situation—just let us know!